Our Products
What is MicroPro® pressure treated wood?
The MicroPro® wood preservative contains micronized copper and azole compounds to protect wood against fungal decay and insect attack in interior or exterior applications.
What are the end use applications for MicroPro® treated wood products?
MicroPro® treated lumber and other wood products are available for: Above Ground, Ground Contact and Fresh Water Contact. MicroPro® products are not currently approved for saltwater immersion applications.
What are Hazard Classes?
Hazard Classes can be different based on the wood preservative system used to pressure treat the wood product and its intended end use (ground contact, above ground contact, etc.). It is important to purchase treated wood products for the intended exposure condition. Typically, wood products are treated for “above ground use” and “ground contact/fresh water immersion use”. More information on Hazard Classes can be viewed here.
Is maintenance required on pressure treated wood projects?
Wood is a natural product, and whether wood is treated or untreated, it is not “maintenance-free”. Pressure treated wood products help protect wood from fungal decay and insect attack. However, moisture, sun, and outdoor conditions may cause the wood project to show signs of weathering. Natural weathering such as raised grain, splitting, checking, twisting, warping, shrinkage, or swelling occurs in wood treated or untreated. To help reduce the effects of natural weathering, the use of a clear water repellent coating or a semi-transparent water repellent coating product is recommended. If you desire to apply a paint, stain, clear water repellent, or other finish to your preservative treated wood, we recommend following the manufacturer’s instructions and label of the finishing product. Before you start, we recommend you apply the finishing product to a small exposed test area before completing the entire project to insure it provides the intended result before proceeding.
Can I paint treated wood?
Yes. If you desire to apply a paint, stain, clear water repellent, or other finish to your preservative treated wood, we recommend following the manufacturer’s instructions and label of the finishing product. Before you start, we recommend you apply the finishing product to a small exposed test area before completing the entire project to insure it provides the intended result before proceeding.
How often do I have to apply a finish to treated wood?
Most water repellent coating manufacturers recommend an annual application. We recommend you follow the manufactures’ instructions.
My deck has not kept its original pressure treated wood color. How can I restore the appearance of the treated wood?
There are several pressure treated wood deck cleaning products on the market that are available and can be purchased from hardware stores or home centers. These cleaning products are typically referred to as cleaners, brighteners and restorers. Always follow the manufacturer’s recommendations.
Can I use a pressure washer on pressure treated wood?
Yes, follow the pressure washer manufacturer’s recommendations.
What fasteners or hardware should I use with treated wood?
MicroPro® treated timber offers many benefits over
many other preservative technologies including
significantly improved corrosion performance.
MicroPro treated timber exhibits corrosion rates when in
contact with metal fasteners and connectors similar to
CCA treated timber and untreated timber.
Please refer to our Fasteners and Hardware Information page for specific details.
Can pressure treated wood posts be buried or installed in concrete?
MicroPro pressure treated wood posts produced for “ground contact uses” can be placed in the ground with or without the use of concrete.
Can treated wood be used in contact with manure or compost?
We do not recommend it; however, if MicroPro treated wood products are used for this application, it is suggested that all of the treated wood products are produced for “ground contact use.”
Can I use treated wood in my raised vegetable bed or around my grape vines?
MicroPro® treated wood products may be used to construct raised bed gardens. The MicroPro treated wood process is certified by Scientific Certification Systems, Inc. (SCS) as an Environmentally Preferable Product (EPP) based on SCS’ Life-Cycle Assessment.
Very small amounts of copper and either quaternary or azole will migrate out of MicroPro treated wood over time. If it is desirable to minimize the migration of copper, quat or azole into the soil of a raised bed garden, we recommend that a suitable thin plastic material be used as a barrier between the MicroPro treated wood and the raised bed garden soil.
The use of a plastic barrier will also help keep the raised bed garden soil within the bed area. For proper drainage, the plastic material should not be used underneath the raised bed garden soil.
Is it safe to use treated wood in a picnic table or on countertops?
MicroPro pressure treated wood products can be used for outdoor picnic tables. We recommend that the picnic table be covered to prevent food from contacting the wood surface. It is not recommended that any treated wood product be used as a countertop. Do not put food directly in contact with treated wood.
Can I use treated wood in feed troughs for livestock?
Do not use preserved wood under circumstances where the preservative may become a component of food, animal feed, or beehives.
How does mould affect wood?
Mould occurring on pressure treated wood products is typically not an indication of fungal decay attack. Mould growth can and does occur on the surface of many products, including untreated and treated wood, during prolonged surface exposure to excessive moisture conditions. To remove mould from the treated wood surface, wood should be allowed to dry. Typically, mild soap and water can be used to remove remaining surface mould. For more information visit www.epa.gov .
Do your pressure treated wood products contain formaldehyde?
Koppers wood preservative products do not contain formaldehyde. However, glues used to produce plywood, glue laminates, and other engineered wood products may contain formaldehyde. Contact the engineered wood producer for information regarding the use of formaldehyde in their products.
Is it ok to use MicroPro® treated wood in contact with NatureWood® ACQ® treated wood?
Yes, Naturewood® ACQ® and MicroPro® treated wood products can be used together; however, use fasteners compatible with NatureWood ACQ where they may come in direct or indirect contact with the MicroPro treated wood.
Are MicroPro® treated wood products available in different colors?
MicroPro® treated lumber and other wood products are also available in popular consumer colors similar to redwood products with the MicroShades® color pigment system. Check with your building material supplier for availability in your area.